Descrizione
The voltage converter is used to convert the input alternating voltage of 24 V AC to the output direct voltage of 12 V DC. It is intended for powering devices requiring 12 V DC from 24 V AC distributions. The metal design with fins supports heat dissipation and the IP68 protection allows use in environments with increased demands for resistance to water and dust ingress.
Technical specifications
Product type: AC/DC voltage converter
Input voltage: 24V AC
Output voltage: 12V DC
Maximum output current: 10 A
Maximum power: 120 W
Efficiency: 86%
No-load current consumption: max. 110mA
Protection: IP68
Working temperature: -40~+80°C
Ambient humidity: 0~95%
Weight: 300g
Certificates: CE, ROHS
Design: aluminum body with cooling fins
Connection: cable outlets
Functions and features
Conversion from 24 V AC to 12 V DC
Sealed design suitable for installations with increased requirements for resistance to moisture and dust
Metal housing with fins for better heat dissipation
Fixed wires for electrical connection
Ideal for
Powering 12V DC devices from 24V AC distribution
Technical and industrial installations
Outdoor or humid environments where IP68 protection is required
Applications where stable conversion between AC and DC power is required
Package contents
1x voltage converter 24 V AC to 12 V DC
Why choose this product?
Meets the requirement of converting 24V AC to 12V DC
Allows powering devices with higher current consumption up to 10 A
Sealed IP68 design expands application possibilities in more demanding conditions
The aluminum body with fins is structurally adapted for heat dissipation
Installation and operating instructions
Before installation, verify that the input and output voltages match the requirements of the connected device.
Make sure that the input and output wires are connected correctly.
Install the inverter so that heat dissipation from the body surface is not restricted.
We recommend that installation and connection be carried out by a qualified person.
Safety notice
Incorrect wiring may result in damage to the inverter or connected equipment.
The power must be disconnected during installation.
Prevent short circuits at the output and mechanical damage to the supply wires.
The device generates heat during operation, so it must be installed with regard to safe heat dissipation.
The product is an electrical device and requires professional installation.
Recensioni
Ancora non ci sono recensioni.