Descrizione
The compact Li-Pol (lithium-polymer) rechargeable battery in a flat case with terminals (red/black wire) is suitable as a power source for small portable electronics and built-in applications. Thanks to its low self-discharge, it is also suitable for devices with occasional operation.
Technical specifications
Cell type: Li-Pol (Li-ion polymer)
Voltage: 3.7V
Capacity: 160mAh
Capacity: 0.592Wh
Charging voltage: 4.2V
Discharge current: 1C
Number of charging cycles: 2000
Minimal self-discharge (approx. 5% per month)
Working temperature: -10 – 50°C
Type designation: 401040
Size: 40 x 10 x 4 mm
Terminal design: wires (red +, black -)
Functions and features
Flat format for installation in narrow spaces
Suitable for repeated charging in low-power applications
Standard nominal voltage 3.7 V for single-cell Li-Pol systems
Terminals on the wires for easy connection to the device
Ideal for
Small portable devices and built-in modules
DIY electronics, prototypes and battery service replacements
Devices powered by a single Li-Polymer cell (1S)
Package contents
1x Li-Pol battery 401040 3.7 V 160 mAh with wires
Why choose this product?
Clearly defined dimensions for structural design
Capacity and voltage suitable for compact electronics power supply
Parameters suitable for normal Li-Pol charging mode (CC/CV at 4.2 V)
Installation and operating instructions
Charge only with a charger/controller designed for Li-Pol (1S) with a terminal voltage of 4.2 V.
Observe the polarity of the wires: the red wire is the positive pole (+), the black wire is the negative pole (-).
When designing the device, consider the 1C discharge current and the corresponding current load of the wires and connections.
Safety notice
Do not overcharge above 4.2V and do not discharge below the safe voltage recommended for Li-Pol cells; use appropriate protection (BMS/protection circuit) according to the application.
Do not short-circuit, puncture, deform, or expose the battery to high temperatures.
Install in such a way that there is no mechanical stress on the housing or wires.
Recensioni
Ancora non ci sono recensioni.