Descrizione
The 4-zone RGB+CCT fiber optic LED light source is designed for lighting applications with separate control of multiple fiber optic branches. The device allows for independent control of four zones, RGB color change, CCT white control and dimming. It is suitable for interior starry ceiling lighting, hotel and home installations, cinema rooms and decorative vehicle ceiling lighting. Communication is via Bluetooth and remote control is also supported.
Technical specifications
Device type: 4-zone RGB+CCT fiber optic illuminator
Supply voltage: DC 12V
Total power consumption: 20 W
Power per zone: 4 × 5 W
Maximum current: 4 x 1 A
Light color: RGBWW / RGB+CCT
Number of independently controlled zones: 4
Communication: Bluetooth
Remote control support: yes
Power input: DC connector 12 V
Output connector type: PG type
Fiber connector inner diameter: 22 mm (PG25)
Maximum capacity per port: 0.75 mm optical fiber up to 520 pcs or 1 mm up to 300 pcs
Main unit dimensions: 115 × 75 mm
Remote control dimensions: 120 × 50 mm
Pendant remote control dimensions: 55 × 35 mm
Output connector dimensions: length 110 mm, diameter 35 mm
Functions and features
Separate setting of 4 light zones in the range zone 1 to zone 4
Independent switching on and off of individual zones
Possibility to create your own zone groups, maximum 4 groups
Separate dimming of the selected group
Seamless color change using the color wheel on the controller
Adjusting the brightness of the RGB component
White balance and CCT brightness control
Setting color switching modes
Dynamic Mode Speed Settings
Support Motor ON/OFF and motor speed adjustment functions
Meteor mode support and speed settings
Indicator LED on the main unit
Bluetooth control app compatibility
Possibility of control using the included remote control and pendant control
Ideal for
Starry ceilings in homes
Hotel and commercial lighting installations
Ceiling decorative lighting in a home theater
Vehicle roof lighting
Multi-zone installations requiring separate control of individual parts
Fiber optic applications with RGB+CCT lighting effect
Package contents
Main 4-zone unit RGB+CCT Fiber Optic Illuminator
Remote control with touch color circle
Pendant remote control
4 PG25 fiber optic output connectors
Why choose this product?
Allows separate control of four separate light branches
Combines RGB effects with CCT white component settings
Supports Bluetooth control as well as physical remote controls
Suitable solution for star ceiling lighting with a higher degree of configuration
Power supply with safe low voltage 12 V DC
The design is adapted to connect a larger number of optical fibers in each zone
Installation and operating instructions
For proper operation, it is necessary to use a stabilized 12 V DC power supply with an adequate current reserve.
Optical fibers are installed in prepared holes and then mechanically fixed in the mounting base.
The ends of the optical fibers can be shortened to the desired length after installation.
Connect each fiber branch to a separate output according to the planned zone division.
When configuring via Bluetooth, it is possible to set individual zones and user groups.
When installing, ensure sufficient ventilation of the main unit and do not cover the light output.
Safety notice
The device is intended for power supply only with 12 V DC.
Do not connect the product directly to the 230 V AC mains voltage.
Perform installation with the power disconnected.
Prevent moisture from entering the main unit and connectors unless the installation is intended for a protected area.
Do not subject optical fibers and connectors to mechanical bending or pulling.
For long-term reliable operation, adhere to the maximum recommended fiber capacity per individual port.
Recensioni
Ancora non ci sono recensioni.