Descrizione
The Eaton xPole PL6-B10/1 single-pole modular circuit breaker is designed for overcurrent protection of electrical circuits in installation distribution. It serves to protect lines and connected devices against overload and short circuit. The design for mounting on a device rail and single-pole arrangement is suitable for common distribution applications in residential and commercial installations.
Technical specifications
Model: Eaton PL6-B10/1
Product type: MCB circuit breaker
Number of poles: 1
Number of phases: 1
Rated current: 10 A
Trip characteristic: B
Breaking capacity: 6 kA
Rated voltage: 230/400 V AC
Rated DC voltage: 48 V DC
Degree of protection: IP20
Module width: 1
Type of connecting contacts: fork
Mounting: on the instrument panel
Cross-section of the connected wire: 1 to 25 mm2
Weight: 0.12 kg
Standard: IEC/EN 60898-1
Manufacturer code: PL6-B10/1
EAN: 4015082865191
Functions and features
Overcurrent protection against overload and short circuit.
Characteristic B for circuits with lower starting currents.
Single-pole design for protecting single-phase circuits.
Modular design for installation in a control cabinet.
Optical signaling of contact position.
On-off indication on the control lever.
Compatibility with terminal strips of the corresponding type.
Ideal for
Home electrical wiring.
Protection of lighting circuits.
Socket circuit protection.
Installation cabinets in residential and commercial buildings.
Package contents
1x Eaton xPole PL6-B10/1 circuit breaker
Why choose this product?
Clearly defined parameters for circuit protection 10 A with characteristic B.
Breaking capacity 6 kA for installation use.
Compact single-pole design with a width of 1 module.
DIN rail mounting makes installation in standard distribution cabinets easy.
Compliance with IEC/EN 60898-1.
Installation and operating instructions
Install in a suitable distribution board on a panel rail.
The connection of the wires must correspond to the specified cross-section and must be carried out by correctly tightening the terminals.
Before commissioning, it is necessary to verify the correct dimensioning of the circuit breaker for the protected circuit.
The product is intended for fixed installation.
Safety notice
The product operates at 230/400 V AC. Improper handling may result in electric shock.
Installation, replacement and connection may only be carried out by a person with appropriate electrical qualifications.
Always disconnect power and verify that the device is de-energized before installation or removal.
Incorrect wiring or inappropriate sizing can lead to overheating, protection failure or damage to the installation.
Use the product only in installations that comply with its electrical parameters and IP20 protection.
Recensioni
Ancora non ci sono recensioni.