Descrizione
The SN04-D2 inductive proximity sensor is used for non-contact detection of metal objects in automation, measurement and control applications. It is designed for DC power supply and provides a switching output for downstream control circuits, relays, counters or PLCs. The design with a cable and a compact square body allows installation in machines, fixtures and working mechanisms.
Technical specifications
Model: SN04-D2
Product type: inductive proximity sensor
Supply voltage: 6 to 36 V DC
Maximum output current: 100 mA
Switching function: NC
Output type: DC 2-wire
Detection distance: 4 mm
Designed for detecting metal objects
Body dimensions: 18 x 18 x 36 mm
Body material: plastic
Functions and features
Contactless sensing without mechanical wear of the switching parts.
Compact square design suitable for installation in limited space.
Cable connection for fixed installation into the device.
Inductive sensing principle for detecting metal objects.
The variant designation D2 corresponds to the NC version in the SN04 series.
Ideal for
Industrial automation and simple control circuits.
Detection of the position of metal parts of machines and mechanisms.
Use with PLCs, counters, relays and input modules.
End and presence sensing of metal parts.
Package contents
1x inductive proximity sensor SN04-D2 with connection cable
Why choose this product?
Specifically defined power supply range of 6 to 36 V DC for use in low voltage DC systems.
NC switching design for applications requiring a normally closed state.
Inductive metal detection without the need for mechanical contact with the object being sensed.
The compact dimensions of 18 x 18 x 36 mm make it easy to integrate into the device design.
Installation and operating instructions
Install the sensor so that only the designated metal object is within range.
Before connecting, verify that the supply voltage and electrical parameters of the input or load match.
During installation, ensure proper cable routing and protection against mechanical damage.
For reliable operation, observe the correct electrical connection according to the circuit used.
Safety notice
Incorrect wiring may result in damage to the sensor or connected equipment.
Only carry out installation and connection when the power supply is disconnected.
The product is an electrical component intended for integration into equipment, not for stand-alone operation without appropriate protection.
When used in industrial or mechanical equipment, professional wiring is required.
Recensioni
Ancora non ci sono recensioni.