Descrizione
TL-W5MC2 is an inductive proximity sensor for non-contact detection of metal objects in automation, signaling and control circuits. The design with three-wire connection and PNP output in NC connection is suitable for applications where switching is required when the presence of a metal target changes without mechanical contact.
Technical specifications
Model: TL-W5MC2
Sensor type: inductive proximity sensor
Sensing distance: 5 mm
Sensing distance tolerance: ±10%
Output mode: 3-wire PNP NC
Supply voltage: DC 6 to 36 V
Maximum load current: 300 mA
Mechanical body dimensions: 30.5 × 18 × 10 mm
Mounting hole spacing: 12 mm
Mounting holes: 2 × 3.5 mm diameter
Status indication: built-in LED
Functions and features
Non-contact detection of metal objects without mechanical wear of the switching parts.
Rectangular compact housing for fixed mounting using two holes.
Three-wire connection for integration into DC control circuits.
PNP NC output for applications where a normally closed output is required.
Optical indication makes it easy to check the sensor status during installation and diagnostics.
Ideal for
Detection of metal parts in machine and automation applications.
Position control of moving mechanisms.
End and presence sensing in industrial fixtures.
Integration into control systems with DC power supply.
Package contents
Inductive sensor TL-W5MC2 with connection cable
Why choose this product?
A clearly defined model with a verified output type and power range.
Compact dimensions and mounting holes allow for simple mechanical fastening.
The contactless sensing principle reduces mechanical wear at the detection point.
The PNP NC output design is suitable for specific control logic in DC applications.
Installation and operating instructions
When installing, observe the orientation of the active sensing surface relative to the detected metal object.
Connect the sensor only to circuits within the specified DC power supply range.
Before commissioning, verify the correct wiring according to the function of the power supply, output and common pole.
A solid mechanical mount reduces the risk of false detection due to vibration or sensor movement.
Safety notice
Incorrect wiring may cause damage to the sensor or the connected control circuit.
Perform installation and connection with the power disconnected.
Do not exceed the permitted supply voltage or maximum load current.
Installation into industrial or control systems should be carried out by a person with appropriate electrical qualifications.
Recensioni
Ancora non ci sono recensioni.