Descrizione
The TL-W5MF2 inductive sensor is used for non-contact detection of metal objects in automation and control applications. It is intended for installation in machines, fixtures and industrial equipment where switching based on the proximity of a metal object without mechanical contact is required.
Technical specifications
Model: TL-W5MF2
Product type: inductive proximity sensor
Sensing distance: 5 mm
Sensing distance tolerance: ±10%
Power supply: DC 10-30V
Output type: 3-wire PNP NC
Maximum load current: 300 mA
Body dimensions: 30.5 × 18 × 10 mm
Mounting holes: 2 holes, diameter 3.5 mm
Mounting hole spacing in the longitudinal direction: 12 mm
Functions and features
Non-contact detection of metal objects based on the principle of inductive sensing.
Rectangular housing with mounting holes for secure mounting.
3-wire connection for integration into DC control circuits.
PNP NC output logic for applications requiring a normally closed state.
Signaling LED on the front of the sensor.
Cable outlet from the sensor body.
Ideal for
Detection of the position of metal parts in machines and automation lines.
End-to-end sensing of mechanisms and moving elements.
Counting metal parts in manufacturing and sorting applications.
Industrial control systems with DC power supply and PNP inputs.
Package contents
1x TL-W5MF2 sensor with cable outlet
Why choose this product?
There is a specifically designated model TL-W5MF2 with a clearly distinguished PNP NC output type.
Known mechanical dimensions facilitate mounting design and replacement with the same sensor format.
The induction principle is suitable for detecting metal objects without mechanical wear of the contacts.
The power supply in the range of DC 1030 V corresponds to common industrial control circuits.
Installation and operating instructions
Install the sensor so that only the desired metal objects are in the detection zone.
When installing, ensure mechanical fastening through both mounting holes.
Before wiring, verify the correct control system input type and corresponding PNP NC logic.
Connect the wires according to the product diagram and with the power supply disconnected.
Safety notice
Incorrect connection of the power supply or load may lead to damage to the sensor or downstream electronics.
Carry out assembly and electrical connections with the power switched off.
The product is an electrical component intended for professional installation.
Do not use the sensor outside the specified power supply and load range.
Recensioni
Ancora non ci sono recensioni.