Descrizione
Universal LED strip with a density of 120 LEDs/m provides balanced brightness and a very uniform light for both decorative and functional lighting. 24 V power supply, highquality 8 mm PCB with 2 oz copper and original 3M 9495LE adhesive layer ensure stable performance, reliable installation and long service life. Supplierverified 5year warranty.
Technical specifications
Chip type: SMD 2835
LED density: 120 LED/m
Power supply: DC 24 V
Power consumption: 18 W/m
Luminous flux: 16501750 lm/m
CRI: Ra> 80
Cutting interval: every 50 mm (6 LEDs)
PCB width: 8 mm, 2 oz copper
Ingress protection: IP20 (indoor)
Operating temperature: 25 °C to +65 °C
Adhesive layer: 3M 9495LE
Lifespan: up to 50,000 h
Features and characteristics
High LED density supports a more uniform light line.
24 V DC supply helps reduce voltage drop over longer runs compared to lower voltage.
The strip is suitable for dimming via PWM when used with a compatible 24 V system.
The back side is equipped with a selfadhesive layer for mounting on a suitable surface.
Cutting every 50 mm makes it easy to adapt the installation length.
IP20 design is intended for dry indoor areas.
Ideal for
Undercabinet lighting in kitchens, shelves and furniture.
Linear lighting in aluminium profiles.
Display cases, shelves and shop windows.
Accent and supplementary interior lighting.
Commercial and decorative lighting installations in dry environments.
Package contents
1 m LED strip SMD 2835, 120 LEDs
Why choose this product
Combines 24 V DC supply, density of 120 LED/m and power consumption of 18 W/m for linear lighting applications.
Enables precise shortening in 50 mm increments.
8 mm width facilitates use in narrower profiles and installation spaces.
PCB with 2 oz copper supports stable electrical and thermal performance.
Integrated adhesive layer simplifies mounting on a prepared surface.
Installation and operating instructions
Use a 24 V DC power supply with an appropriate power reserve.
Carry out installation on a clean, dry and thermally suitable surface.
For longer service life and better heat dissipation, installation in an aluminium profile is recommended.
Cut the strip only at the marked cutting points.
The product is intended for indoor use in dry environments.
Safety warnings
Incorrect wiring may cause damage to the strip or the power supply.
The product is not intended for direct connection to 230 V mains voltage.
Perform installation only with the power disconnected.
Due to the strips power consumption, sufficient heat dissipation must be ensured by installing it in an aluminium profile.
For the installation of longer runs or in case of any uncertainties regarding wiring, professional installation is recommended.
Recensioni
Ancora non ci sono recensioni.