Descrizione
Mister fix immediate grip 380 kg/m² for bonding wood, marble and metal Description:
Misterfix immediate grip is the fastest assembly adhesive among all MS polymers. It bonds underwater. It contains no solvents and does not deform, even on beads up to 40 mm in height.
Misterfix immediate grip has a very high initial adhesive strength, making pre-fixing unnecessary. Misterfix immediate grip was created to achieve excellent bonding results in both indoor and outdoor construction applications. Misterfix immediate grip replaces welding, bolts, screws, nails, etc.
Adheres in a few seconds on all construction materials
Suction cup effect
Features:
Supports 380 kg/m² in 10 seconds.
Usable on wet surfaces and under immersion.
Odourless, solvent-free and isocyanate-free, suitable for use in enclosed spaces.
Resistant to impacts and vibrations.
Permanent elasticity.
Suitable for indoor and outdoor use.
Applications:
Misterfix immediate grip is suitable for bonding on:
Wall coverings: concrete, cement, bricks, plaster, aluminium, glass, etc.
Ceilings and panels: all insulating panels, synthetic, wooden, PVC, polyurethane, etc.
Window frames: coated aluminium, wood, synthetic materials, etc.
Door frames and window sills: natural wood, bricks, cement, aluminium and brass, etc. safely and without waste.
Floors, tiles, supports: marble, granite, porous materials and terracotta, etc.
Roofs and coverings: all elements for wooden, steel, copper and pre-painted sheet metal roofing.
Building elements: all construction elements in smooth steel, aluminium, metal, copper, etc.
Bonding of accessories and/or shower enclosures.
Directions for use:
Always use on clean surfaces free of dust and grease.
Clean and degrease the surface with solvix or puli5.
Apply with suitable sealant guns gun7 or multigun.
Given the wide variety of different types and compositions of plastic materials, as well as materials subject to thermal expansion,
it is recommended to carry out preliminary tests.
Test adhesion on plastics, powder coatings, exotic woods and bituminous materials.
Given the wide variety of paints and coatings on the market, preliminary tests are recommended. Using
alkyd resin-based products may slow down the curing process.
Use solvix to clean and degrease safely, to achieve a perfect finish and to remove uncured polymers. Use
full5 for finishing on porous materials.
When bonding mirrors inside bathrooms, apply only vertical adhesive strips to avoid stagnant humidity that may result
from condensation.
Minimum thickness for optimal adhesion: 2 mm.
Ideal thickness for optimal adhesion: 3 mm.
The nozzle features a V-shaped groove that allows correct dosing of the thickness required for adhesion.
Do not cut the nozzle.
During application, position the nozzle perpendicular to the surface.
To achieve the strongest possible adhesion in the shortest curing time, apply the adhesive in strips rather than dots.
Product code: ST534525
Recensioni
Ancora non ci sono recensioni.