In offerta!

Start-up capacitor CD60, 450V, 100uF-Spedizione veloce

Il prezzo originale era: €3.71.Il prezzo attuale è: €1.11.

COD: 521720282 Categoria:

Descrizione

The CD60 capacitor is designed for starting circuits of single-phase electric motors, where it provides the necessary phase shift and increase in starting torque. It is particularly suitable for applications powered from a 230VAC network, typically pumps, compressors and other devices with an auxiliary winding.

Technical specifications

Type designation: CD60

Capacitance: 100 µF

Tolerance: ±5%

Rated voltage: 450 VAC

Rated frequency: 50/60 Hz

Dimensions: 80x35mm

Design: cylindrical housing, conductor terminals

Functions and features

Designed for short-term engine starting mode (starting capacitor)

Support for starting single-phase asynchronous motors using phase shifting

Compact cylindrical design suitable for installation in equipment

Wire terminals for direct connection to the circuit

Ideal for

Starting circuits of single-phase electric motors

Pumps, fans, compressors and similar equipment with auxiliary windings

Service replacement of starting capacitors in domestic and industrial applications

Package contents

1 pc of capacitor CD60 450VAC / 100µF with wires

Why choose this product?

Clearly defined electrical parameters for motor starting applications

Rated voltage 450VAC for use in mains applications with adequate headroom

Simple connection using wire terminals

Installation and operating instructions

Before installation, verify that the capacitance and rated voltage match the original capacitor and the motor requirements.

Use the starting capacitor only in a circuit with a switching element (e.g. centrifugal switch, relay) that disconnects it after starting.

Always safely discharge the capacitor using the appropriate procedure before handling.

Safety notice

The product is intended for use with hazardous AC voltage (mains applications). Only perform installation when the power supply is disconnected.

Improper connection or use outside the intended mode may result in damage to the device and risk of electric shock.

After disconnecting the power supply, the capacitor may remain charged; discharge is necessary before touching the terminals.

Recensioni

Ancora non ci sono recensioni.

Recensisci per primo “Start-up capacitor CD60, 450V, 100uF-Spedizione veloce”

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *